Kevin
05-03-2000, 10:15 AM
I have LowranceLMS 350 and a Minn-Kota 101. I get terrible interference on the LMS screen.I have talked to both Manufactures and followed their instructions to the tee. Little or no good.I have taken transducer off and it will clear when get 8ft away.I have grounded skag(seperate ground wire)bracket,metal shaft,even spring,Both batteries together,seperated wiring,This clears screen some BUT NOT 100%. If anyone has this setup and has a solution please post, or if you have any idea's on solution.I feel the power wiring needs to be Sheilded from battery to motor But this would involve disassemble of entire motor.