Jig Hooks

[Rigger]

When you pour Jigs what size hooks do you like to use? 1/16, 1/8, 1/4, 1/2.

Thanks

Rigger

[Jigginman123]

I would use 1's for 1/16-1/8 and 2/0 for 1/4-3/8 I only use Eagle Claw 575 jig hooks .Bronze is best but gold will work ok .The size of hook depends on the body size you use.If your mold has a barb made in it fill it in with epoxy and file a hook gap in it. The barbs on a jig head are good for one thing,to tear up grub tails .You need no barb unless you are going to tie on maribou hair or feathers.

Keep your hooks Sharp
Jigginman

[Chuckles]

I would also suggest size 1's, 1/0 or 2/0 - but prefer the mustad jighooks as they use slightly finer wire than the eagle claw and are sharper IMHO. Tried gamakatsus but am still forming an opinion - I think they are too strong - won't bend to release a jig from a snag -I'll have to get back to you on that one. Prefer the bronze for all applications. Chuckles

[Jim Carroll]

Most Do-it Jig molds list the size of the hooks for the cavity. I always use the larger size. Try Mustad's Ultra Point jig hooks if you're looking for an excellent hook at a reasonable price- they are really sharp- I buy them at Stamina Tackle. Jim Carroll NPAA #588