: Etec,, won't get on plane


Tom22
07-22-2008, 10:23 AM
I have a 2006 225HO with a 22 Raker on a 620 Ranger...I fished the MWC this past week and ran 30 miles at about 35mph,, after setting it down,,I tried to make a move and I could'nt get on plane,,it would only go 8 mph at 3000 rpms....When my partner went to the bow, we were able to slowly get it on plane,, but could only get 4200rpms out of it...if he was'nt at the bow ,we could'nt get on plane...nothing wrapped on prop,, no water in bilge....any ideas?.....Tom

krawler
07-22-2008, 03:47 PM
Did you check the oil level? Sounds like it was running in the get home mode.

Tom22
07-22-2008, 04:17 PM
oil was good

ffishman
07-22-2008, 04:45 PM
Sounds like you spun the prop. Pull the prop off and have it checked out.

Tom22
07-22-2008, 06:40 PM
just talked to the dealer.....#2 injector was bad...Tom