trapper201
08-20-2008, 06:06 PM
Have any of you come up with an off the shelf container (pop bottle,platic something) that can be used on calm inland lakes as a planer board instead
of the big, bulky and expensive commercial ones. All the plans I see are 2x8`s with theaded rod...... I just want a simple small thing.
I`m just trying to get a rapala away from the boat a little. I`m going to try and glue a 2inch thick styrofoam piece to a 2x4 cut with a 30 degree compound angle and screw a release onto the back. It may be a flop but I`ll see how it works.
If you have a design that works I`d appreciate the info. i`ll let you know if mine works.
thanks
of the big, bulky and expensive commercial ones. All the plans I see are 2x8`s with theaded rod...... I just want a simple small thing.
I`m just trying to get a rapala away from the boat a little. I`m going to try and glue a 2inch thick styrofoam piece to a 2x4 cut with a 30 degree compound angle and screw a release onto the back. It may be a flop but I`ll see how it works.
If you have a design that works I`d appreciate the info. i`ll let you know if mine works.
thanks