09-11-2008, 07:01 AM
I recently purchased a 2006 620 and noticed one of the hubs was a little low on oil. I was able to remove the set screw on the hub for the non-brake axle but the hub with the break does not have a set screw, I even removed the break assembly and no set screw to be found. How do I change this oil? The caps are the yellow/clear ones...
09-11-2008, 07:39 AM
No rubber plug in the center of cap?
09-11-2008, 07:47 AM
Nope... No plug in the cap either...
A local "Ranger" dealer told me that the cap unscrews and I am to fill the cap with oil and flip it back on. I just thought I would check here because that does not sound like anything I have read or heard about these.
I only had time to check one side, so I am not sure if both sides are this way.