View Full Version : Mercury smart craft gages
Gilligan
09-12-2008, 04:34 PM
I have really poor results with the accuracy of my fuel level. Is this normal or is there a problem. My first 1/2 tank of gas from full is very accurate but once I get below 50% it drops like a rock. I have had the gage showing from 0-5% fuel remaing and will still have 40+% fuel remaining.
Hot Runr Guy
09-12-2008, 05:27 PM
which gauge are you using to monitor the tank level, and which calibration method (of the 3 available) did you use to calibrate the gauge?
HRG
Gilligan
09-14-2008, 08:52 AM
which gauge are you using to monitor the tank level, and which calibration method (of the 3 available) did you use to calibrate the gauge?
HRG
Never knew there was more than one smart craft gage? I have never done calibration, that was done at dealer.
Hot Runr Guy
09-14-2008, 05:59 PM
If these are the gauges you have, look at page 22-23 for the calibration procedure. The dealer may not have done #3, which would be the most accurate.
http://www.mercurymarine.com/_media/pdfs/otherproducts/smartcraft_manuals/System_Tach_and%20Speed_Manual.pdf
HRG
Gilligan
09-15-2008, 10:57 AM
If these are the gauges you have, look at page 22-23 for the calibration procedure. The dealer may not have done #3, which would be the most accurate.
http://www.mercurymarine.com/_media/pdfs/otherproducts/smartcraft_manuals/System_Tach_and%20Speed_Manual.pdf
HRG
Thanks Hot Runner...those are the gages I have. Will give that a try