I am wanting to mount my humminbird ducers on the portside of my transom. I mounted a transducer board to attach them to figuring they will require some adjustment. I have a quadbeam and wideside and planning on mounting the wideside towards the center at 15inches off the prop and than the quadbeam outside of it. Now my question is how far do i need to be away from the wideside without one or the other obstructing the others view? the intsructions say the qaudbeam doesnt have to have any adjustment for deadrise but i have 05' 2025 and the deadrise is fairly sharp so dont want to be to far to the outside and have it above the water line when on plane or kicking up a terrible rooster tail. Also by locating the wideside 15inches off the prop i'm not sure if it will view to the starboard side. Any input here would be appreciated...just curious what any of you guy's experiences are. thanks

ryan

Go on this site they have great pictures to see how and where to set them up.

Yahoo Group "sideimaging"

http://groups.yahoo.com/group/sideimaging/