motorguide prop

[Guest]

I have a motorguide digital trolling motor and the prop won't come off. Took the nut off the bolt and prop won't come off. Tryed wiggling, turning the prop while holding the end of the bolt with pliers, etc. Any suggestions.

[CLDFRNT]

Screw the nut most of the way back onto the shaft being carefull not to expose any of the threads. Then put outward pressure on the prop with one had, then hit the nut with a hammer. Don't hit it to hard. It usually does'nt take to much to jar it loose.
Good luck Mark N