PDA

View Full Version : Shorelander axle Question


deeznuts
04-02-2009, 07:26 AM
I have a 1996 Shoreland'r trailer that has a bad grease seal. it is the standard trailer used on lots of 17 ft boats without brakes(2200 lb I think) 13 inch tires, single axleDoes anyone know the seal diameter (ID and OD)?
Thanks in advance!

Hot Runr Guy
04-02-2009, 07:32 AM
Go here: http://www.shorelandr.com/pages/o_e_tc_service.aspx

this is the Shorelandr manuals page. Be patient, sometimes it takes a little while to load. Find your trailer model, and open the parts manual.
HRG

MN_Moose
04-02-2009, 08:31 AM
I have a '99 Shorelander about the same size. This is what mine takes


NAPA # BR 4 L68149 / L68111 1.980 OD aprox 1.00 ID
NAPA # BR17 L44649 / L44610 2.362 OD aprox. 1.25 ID

Oil seal NAPA # 17404

Hub
5 bolt
step shaft
2” id inside
2.375 ID outside


Studs
M14 – 1.5 x 43mm NAPA # 641-2172
Nut NAPA # 641-2137

deeznuts
04-02-2009, 09:02 AM
Thanks a lot!

abuck50
04-10-2009, 08:00 PM
If you can get the serial number off of your trailer and e-amail Shoreland'r they will forward your owners manual in pdf format. It will have all the info you need. That's what they did in my case anyway. They were most helpful.