Brandon1
06-01-2009, 11:50 AM
I have a trollmaster that just stopped working. The control lights come on but the motor doesn't respond. This is the first time this has happened. The unit worked last time on the water. It's connected to a remote throttle 2008 T8 on a ranger 620. Any suggestions on what to look for?
yarcraft91
06-01-2009, 01:10 PM
Two suggestions:
- Check that the wiring harness is securely plugged into the control unit. Since the lights work, it likely is, but worth a look anyhoo.
- Check that the wiring harness is plugged into the servo motor harness. Caution! there are two ways to plug those connections together and only one is right!
- Check that the cable linking the servo to the throttle is intact and attached. One of the cable fittings swaged onto mine was loose.
If it still isn't working, contact Bill at Trollmaster.