Lund Fisherman 1800 trailering cover

[bobberal]

One boat trailering cover for a 2003 LUND 1800 Fisherman. Almost like new and has been lightly used. Should fit many other Fisherman years. This was custom made by Crystal Pierz marine. Might be a collector item?...lol

$250.00 plus shipping.

Call or E-mail bobberal@hotmail.com Al @ 320-203-9269 or Cell 513-675-7646

[alanexpup]

HI. Just wondering about something. I have a lund tyee 18.5 feet. I noticed on your cover you have the rope running around the boat through those black nylon loops to tie off at the rear. I never thought about doing it that way but it might be better that what i did. i have a rope tied to each loop on one side and then under the boat the rope is then tied to the corresponding loop on the other side of the boat. when you trailer your boat is there any problem with it coming off and anything? I just might try it your way. thanks alan

[bobberal]

The rope you are looking at is a bungee. When it is moored you tie it off to the back, when it is trailered you pull the bungee down to clasps on the trailer for a tight fit.

Al

[alanexpup]

I see. so when trailering for every loop on the cover there is a hook on the trailer that you stretch the bungee down to on both sides of the boat. I have the ropes that i explained earlier and they loosen up after a while and when moored they are a hassle hanging in the water. I am wondering how long a bungee i would need for my boat. with the bungee cord on your boat as its pictured is there any tension on the cord? are the hooks on the trailer permanently attatched or what? this would solve a lot of problems for me going this way. thanks for your help. alan

[bobberal]

On my old trailer that was the way is was. Then I got this new trailer and I purchased a snap cover.

There was a place between every pulldown to hook the bungee. It does also work great as a moring cover too.

Al

[bobberal]

I am sure this would fit other style of 18 foot boats with a windshield.

This is a heavy duty cover, not the cheap ones you by from Cablea's

[SM1]

does this type of cover mar the sides at all while gonig down the road?

I have a cover on my 1800 fisherman that straps around the trailer and I can never get it tight enough to prevent some flapping.

I know a snap cover would be better but this might be an upgrade?

[bobberal]

Hey SM1 give me a call. It will be easier to talk to to you about it.

Al

[bobberal]

To The Top...Make me an offer.