View Full Version : Co-Pilot beep codes
Shellback
08-14-2009, 09:26 PM
Someone refresh my memory please. How do you set the beep codes on the Co-Pilot? The ones that sound when you turn the motor on and off, and also the steady one that tells you the motor is running. I was fishing tonight and must have mashed the right combination to shut off all beeps. I like to here them. Thanks, Ron
Shellback
08-15-2009, 06:32 AM
Minn Kota has a FAQ forum on their website, which has a section for the co-pilot, and it also lists how to change the beep code. Unfortunately they forgot to post the answer. Click on the question, and you get no answer!
blueicecpa
08-17-2009, 03:42 PM
Sounds like your audio mode is set to 3. Change it to mode 2 which is suppose to be default. To change it, press and hold both the increase and decrease buttons. The receiver will respond with 1, 2 or 3 audible beeps indicating which mode it is in.
Sounds like your audio mode is set to 3. Change it to mode 2 which is suppose to be default. To change it, press and hold both the increase and decrease buttons. The receiver will respond with 1, 2 or 3 audible beeps indicating which mode it is in.
how long do you hold those 2 buttons ? I tried it with mine and I don't hear anything. The remote works fine for all functions but no beeps
blueicecpa
08-17-2009, 06:59 PM
On my Terrova, this is an optional setting - it toggles between
chirping while motor is on, to chirp once when a button is pushed,
to no chirp... I can change mine by mashing the - and + buttons on
the copilot at the same time and hold till it chirps. At least ~ for 2 seconds.
You have the remote with you when u push reset? This synchronizes the 2 units.
Unplug the copilot and plug back in. I had to this on my Terrova to get it to stop chirping.
What unit do you have?
Can you find your instruction manual for it ?
On my Terrova, this is an optional setting - it toggles between
chirping while motor is on, to chirp once when a button is pushed,
to no chirp... I can change mine by mashing the - and + buttons on
the copilot at the same time and hold till it chirps. At least ~ for 2 seconds.
You have the remote with you when u push reset? This synchronizes the 2 units.
Unplug the copilot and plug back in. I had to this on my Terrova to get it to stop chirping.
What unit do you have?
Can you find your instruction manual for it ?
Mine is the unit for a power drive with sonar and auto pilot
I emailed Minn-Kota for a replacement owners manual
blueicecpa
08-17-2009, 10:04 PM
http://tnhatlfs01.thenethouse.com/striperpics/mkrepair.pdf/Minn%20Kota%20Repair%20Manual.pdf
pg 16-1 & 2