View Full Version : Eagle FishEasy 320C doesn't show fish
Happy Camper
08-19-2009, 10:09 PM
My Eagle FishEasy 320C doesn't show any fish but it shows the bottom
and the depth in 15 fow. There was 4 of us in the boat catching waleye as fast as we could unhook them so I know there was fish there. In 45fow it shows fish.
Thanks for any help.
Happy Camper
VernH
08-19-2009, 10:39 PM
At 15ft depth, a 20 deg tranducer shows about 5.5 ft of the bottom. I'm guessing that most of the fish you caught were outside that area.
At 45 ft, the cone angle covers 16.5 ft. (depth X .364... .364 is the tangent of 20 deg)
Happy Camper
08-19-2009, 10:59 PM
I know there was fish under it I was vertical jiging under the transducer and catching fish . I did that with a cuda and I was pickingup my jig.
hondo
08-20-2009, 08:41 AM
Did you try bumping up the sensitivity on your 320c?
Another idea is you could try adjusting the angle of the transducer slightly -- even with the angle off it should still show fish if you can see the bottom, but tweaking the angle might improve what you're seeing.
Or, how old is your transducer. They wear out after a while, as a last-dtich effort you could try a new transducer.