northshoremb
09-27-2009, 10:02 PM
Here are the mods I have made to make my own Tattle flag system that (goes up) like a tipup when a fish grabs it and I also added a leader system that alows you to still have the board slide down the line afetr released so you don't have to chase down the boards which is a pain in the *** when running 3 or more. If I was running two I would just let it pop clear then retreive them.
First I removed the flags and rear eyelet for release. I use some eyelets from hardware store to mount in location in the pics. also a spring from hardware store that isn't to heavy. I made the wire the goes from flag to release out of bulk leader material that you twist and melt with a lighter. I cut one section off front of weight on bottom to help bring the nose out of the water so it doesnt dive in bigger waves. The pictures are self explanitory for anyone who is mechanical. I just thought it out in my head what would work and what wouldnt and this is what I came up with. Also wrote my name and number on top of boards incase one got lost somehow and an honest fisherman retrieved it.
First I removed the flags and rear eyelet for release. I use some eyelets from hardware store to mount in location in the pics. also a spring from hardware store that isn't to heavy. I made the wire the goes from flag to release out of bulk leader material that you twist and melt with a lighter. I cut one section off front of weight on bottom to help bring the nose out of the water so it doesnt dive in bigger waves. The pictures are self explanitory for anyone who is mechanical. I just thought it out in my head what would work and what wouldnt and this is what I came up with. Also wrote my name and number on top of boards incase one got lost somehow and an honest fisherman retrieved it.