PDA

View Full Version : Water~Pressure Gauge

San Chan
03-15-2010, 06:52 PM
Will this fit for my 2006 Mercury 4s 90HP? Are they are all universal? Anything else I need to buy or is a plug and go?

http://www.basspro.com/webapp/wcs/stores/servlet/Product_10151_-1_10001_10205445____SearchResults

Thank you
TomP.
03-16-2010, 08:30 AM
It does not mention what comes with the gauge. Last one I installed I had to buy the threaded fiting for the tubing to fit the engine. I would call BP and find what is all included.
San Chan
03-17-2010, 06:38 PM
It does not mention what comes with the gauge. Last one I installed I had to buy the threaded fiting for the tubing to fit the engine. I would call BP and find what is all included.



Can't find the fitting you mentioned on iboats.com. You have link to it?
San Chan
03-17-2010, 06:39 PM
Can't find the fitting you mentioned on iboats.com. You have link to it?

Thank you
Knot Tellin
03-18-2010, 08:22 AM
Get a smart craft gauge set. You will have everything covered plus you can use them to control you speed for trolling. Below is a link to Mercury's site they have list of available thing the monitor.

http://northamerica.mercurymarine.com/precisionrigging/smartcraft/smartcraftataglance/components/gauges.php

Will this fit for my 2006 Mercury 4s 90HP? Are they are all universal? Anything else I need to buy or is a plug and go?

http://www.basspro.com/webapp/wcs/stores/servlet/Product_10151_-1_10001_10205445____SearchResults

Thank you
San Chan
03-18-2010, 11:08 AM
Get a smart craft gauge set. You will have everything covered plus you can use them to control you speed for trolling. Below is a link to Mercury's site they have list of available thing the monitor.

http://northamerica.mercurymarine.com/precisionrigging/smartcraft/smartcraftataglance/components/gauges.php



I don't think my 90HP 2006 4s can ran that, according to my 2006 Catalog......let me double check with Mercury.
Hot Runr Guy
03-18-2010, 01:28 PM
I don't think my 90HP 2006 4s can ran that, according to my 2006 Catalog......let me double check with Mercury.

San Chan, the Mercury EU site that I use for manuals only lists a 80/100/115 4S for 2006, which is an EFI motor. Here is where they claim the SmartCraft connector would be under the cowl, maybe you can look to see if you have it?
HRG
San Chan
03-23-2010, 08:20 PM
San Chan, the Mercury EU site that I use for manuals only lists a 80/100/115 4S for 2006, which is an EFI motor. Here is where they claim the SmartCraft connector would be under the cowl, maybe you can look to see if you have it?
HRG

Thanks.......wouldn't able to do that till the boat out of the storage. Hope it will work on mine