Lindyrig
04-12-2002, 07:09 AM
What prop are you running on your 1800 with 175EFI? What are your max rpm's? Thanks.
Lindyrig
Dave in Mpls
04-12-2002, 07:25 AM
That should help....
Regards
Lindyrig
04-12-2002, 07:33 AM
Thanks. I new the minute I hit the post that I had typed in the H instead of the J., but it was to late. Thanks.
Hey Lindyrig, I'm running a "modified" 21p Trophy Plus (4 blade). I had it re-worked by DAH props. The blades are a little thinner, knife edge and I had a little more tip cupping added. I can not blow out the prop. I'm running a Panther jacklift and I can really jack the thing up. The cavitation plate is probably 4" to 5" above the hull bottom. However, with the Lund hull, no matter what you do you you really won't get much more than 54 mph :-). I typically get 5250 to 5400 rpms depending upon the weather. I have heard that the Tempest 21p is also an awesome prop for this rig. If you ever have any blow out problems consider more tip cupping, it will eliminate the problem. Post or e-mail me if you have any questions.
Best Regards,
FJH