View Full Version : LMS 350A
I own an LMS 350A and I have been having trouble with attaching and unhooking the unit. The plastic screw-in connector is very difficult to turn. Has anyone out there had a similar problem, and if so, any suggestions? Thank you and keep the line wet!
Kroe
Wal-lies
07-10-2000, 08:00 PM
I sure have. I have busted many a good knuckle on that thing. The only fix I have found however is to always carry band aids. Sorry
Todd
FROGMAN
07-11-2000, 04:56 AM
I was experiencing the same problem you are having. It was very frustating to take it on, and off every night (especially while on the raod at tournaments). I have found a quick fix that has worked for six months so far. I just gave each of the connectors a quick shot of silicone lubricant and they have worked much better! Try it and good luck!!! FROGMAN
Cranker
07-11-2000, 05:04 AM
FROGMAN has you going in the right direction. The nice thing about the silicone is that it won't collect dirt. HOOK 'EM!
AquaMan
07-11-2000, 09:13 AM
Yepper, use the silicon or Dielectric grease. It will do 2 things. Make attaching/detatching easier and it will reduce/elimante corrosion on those contact pins.
Happy trails!
AquaMan~~~~~~~~~~~~~