PDA

View Full Version : Ice Shanty


kodiak
01-17-2003, 07:21 AM
Hey guys,
I am big into ice fishing for walleye. I usually have 2 or 3 tip-ups set up with one hole for jigging. As everybody knows it gets pretty fricken cold out when you are out side for hours at a time. I was wondering if anybody had any good designs for an ice shanty that would be easy to make, somewhat light, big enough for up to 3 people. Any help would be more then appreciated. Thanks

Kodiak

tracker
01-22-2003, 08:06 PM
check out this site, http://www.fishontario.com/ice-fishing/buildahut/workshophut.html

Ivy
01-23-2003, 11:49 AM
Kodiak,

Instead of using canvas or a poly-tarp


If you use this design and you live in the states, go to any billboard company and ask them for an old billboard vinyl. They will more than likely give you one. ( And be happy you took it off their hands. ) The vinyl from a billboard is made from a heavy guage vinyl and is very tough.

I work for a billboard company and we are looking to give these old vinyl away as tarps, etc


Ivy