Spinner Harnesses

[Ryno]

What products / invetions have ya'll found to work the best for storing spinner/ lindy snells?
Ryno

[Ernie]

I have used both commercial versions of the wraps. One rubber that you wrap from tag end to hook end and the other that uses velcro tabs. I gave them away. I went to the hardware store and for 87 cents I picked up a 6ft section of the foam pipe insulation for 1 inch pipes. I have heard of people using the larger diameter stuff, or the kid water toys we call noodles. I like the smaller diameter to fit in my box. I cut it into sections to fit in the space in my tackle box that I have designated for snells - about 9inches each (I still have about a 3ft chunk left). I used toothpicks thru the section to provide an anchor and separation for each snell - about one-half inch extends from both sides - and it prevents it from rolling around. This has worked better than any commercial gadget, plus I am cheap.

[Badfish]

The pipe insulation works great, and the price can't be beat. I just used some pins to hold a loop I tie in the end of the spinner leader.

[GORD]

Pipe insulation works good. Tuck the loop knot into the slit. Wrap the snell around, then stick the hooks into the foam. The 3" dia. foam works good and I hear it can be put into a tennis ball tube.

[PWaldow123]

Cheapest, easiest, and best way I have found is to use the snack sized ziplock bags. Can store many of them in a very small space. Once in a while one of them will get a little tangled, but that is usually what happens when I unpack them new anyway, no harm: no foul.