Adding a Trim Switch to the bow

[EsoxProSport]

New Lund, Merc 115, I would like to add a trim switch to the bow... could anyone suggest a part number, Mercury or Aftermarket thaT would work well and look good up on the bow panel area?

[GP NJ]

I installed this one at the console for my Panther 35 kicker lift

http://www.westmarine.com/webapp/commerce/command/ProductDisplay?prmenbr=201&prrfnbr=5887&store_num=&store_name=&subdept_num=&subdept_name=&class_num=&class_name=&outlet=

Or try this one- #220559 at this link

http://www.boatus-store.com/MC_Online/Browse.asp?ShowItem=16929

Hope this helps, GP

[JohnH]

Should be very easy to add switch. Just need to run three wires from the trim switch at back of boat to front and attach to a momentary-on, off, momentary-on toggle switch. Since you have a Lund there may be a wiring harness with the trim wires running to the bow. If so, the wires will have the female spade terminals at the end which makes for easy hook-up and no slicing of wires. Find the three colors that go to the trim swicth in back and look for the same wires in the bow end of the harness. That is all there is to it. Good Luck!

[EsoxProSport]

Good Suggestion, should have one installed soon.