Triton Question

[Split_Shot Wi]

Where would be a good location for a transducer on a 205?

[Coryv]

Call Riverside Marine in New London. They do an awsome job of rigging boats. Boyd or Paul should be able to help you out. Their phone # is 920-982-4874.

Good luck!!

[Split_Shot Wi]

Thanks for the info.

[bobk]

I used the shoot thru the hull tranducer and it works great. Might check into it. The pad on the 205 is a little tricky for mounting the transducer. Bob

[Mark]

I mounted my transducer (thru the hull type), in the bottom of the hull right next to the drain plug, remember to leave room for the plug that comes through the drain. I get good pictures with it on my X-15mt.

[Capt Doug Schreiber]

I have a Raytheon 750 and I shoot thru the hull. Its easy and I did it myself about two days before the Merc National Tournament. Otherwise go over to Riverside and the guys will take care of you.
Capt. Doug Schreiber, Hot Jigs Guide & Charter Service

[Split_Shot Wi]

Thanks guys for all your help it is appreciated. :D