PRO V 1900

[RO]

Looking at buying a 1900 w/ 200 HP Honda or Yamaha and a 8 HP kicker this winter. I fish a lot in shallow areas, sometimes as shallow as 1.5 to 2 feet or less.

Do any of you 1900 guys have an idea as to what your boat drafts? I called Lund and they thought about 14-15 inches, but they didn't know for sure.

Thanks,

RO

[Orange Whip]

I've had my 2025 with a Honda four in two feet of water and less. I was not comfortble doing so but it did. I was quite impressed.

[Reels]

I have that rig, and although I too have done it, I dont do it as often as when I had the 17'.

The boat is a bit harder to control due to size, so going around rocks is a bit harder, though not imposible, and I think it is a bit harder to see in front of the boat into the water if that makes sense. Maybe because you sit farther back, maybe because your up higher?


<{{}}><

[T-Mac]

Really no absolute precise answer for that, due to possible location of weight (people) in the boat. But I have been in 2' with a 1900 Pro-V w/ 200 & kicker & all the other goodies - troll motor w/ batteries, 500 jigs, 150 crankbaits, 14 rods, 80 bottom bouncers, anchor, etc...you know "the usual load" we all seem to carry.

Engine tilted fairly high, of course.

[Orange Whip]

>I have that rig, and although I too have done it, I dont do
>it as often as when I had the 17'.
>
>The boat is a bit harder to control due to size, so going
>around rocks is a bit harder, though not imposible, and I
>think it is a bit harder to see in front of the boat into the
>water if that makes sense. Maybe because you sit farther back,
>maybe because your up higher?
>
>
><{{}}><

Reels

You say you have the 2025 with the Honda?

If so what hole is your motor mounted on. Seems as if I have alot of torque. Mines on the bottom hole.

Any help would be greatly apprecitated

Thanks

[Reels]

Hey OW

I have a 1900 with a 200 Yamaha and a 9.9 yami kicker.

Sorry guy.


<{{}}><