AZeyes
01-11-2004, 02:58 AM
Here's the deal I had a 2003 lund angler ss with a suzuki df 90 4 stroke that was destroyed in a traffic accident no problem wasn't my fault I have progressive insurance with total buy back Orders a new 2004 lund angler ss with a 140 Johnson 4 stroke . I know a lot of you guys rig your boats I need to know prop size,stainless or Alunimun and what to look for to make sure the boat is riged properly . I have a lowrance x15mt with gps and a x97 with temp that need to be put on also. Do I need a jack plate with this motor .
gary d
01-11-2004, 08:12 AM
Lund does not recommend the use of jack plates.
I've never seen a jack plate on an angler.
That boat should almost fly with a 140.
That angler/Johnson is a nice boat package.
X97 should have a johnny ray swivel mount or RAM mount.
If you put a front elec trolling motor, it should have a quick detach bracket.
The transducer for the X97 should be mounted using a transducer mounting plate.
Add guide ons to the trailer if you didn't already. Also, a swing away tongue.
Make sure Jack is on port side (drivers side of your vehicle, pass side of boat)
If you bought a bunk, have them put glide slicks on or buy an aerosol can of liquid rollers.