Thanks everyone for the info on the amp draw for the LSS-1. It appears it only draws 0.6 - 0.75 amp / hr which is very small. I had my front bait well and rear livewell pumps running at a high recycle rate for 10 hours which was the likely culprit. If they were running 75% of the time they would draw (5 amp x 2 x 10 hr x 0.75) 75 amps alone. Add in the HDS and Structure Scan for 10 hours and then having a hard time starting my kicker motor initially on this trip turning it over repeately at the end of the day and I can see why the starting motor would not turn over the 250.
|