|
|
|
#1
|
|||
|
|||
|
when i fill it burps back. surely a vent is block. just wondering where to start. also thought of the gas tube collapsing. anyone else have trouble?
|
| Sponsored Links | ||
Advertisement | ||
|
#2
|
|||
|
|||
|
Are you talking about constant burping or just at the end of the fill.?
I have a 2006 and it fills ok and I listen for the change in sound at the finish to avoid splashing gas at the end. Sometimes, an adjustment in the angle the nozzle is inserted affects the fill speed. Take care, |
|
#3
|
||||
|
||||
|
I had a SeaRay that did the same thing. And, like you said, a vent line was kinked. After I straightened it out, all was fine.
|
|
#4
|
|||
|
|||
|
it does it all the time. when i start to pump gas, i get about 1.5 gallons in them it spits back about .25 gallons. went out today had to fill with a gas can, that is the only thing that will fill slow enuff to let it breath out the fill tube.
|
|
#5
|
|||
|
|||
|
I don't know what year your ranger is, but on my 04' 621 you can unscrew the cover by the rodlocker and see the hoses that go into the tank under the rod locker.
Brian |
![]() |
| Thread Tools | |
| Display Modes | |
|
|