Structure Scan Mounting Location

[3 Z's]

Anyone with a Lund Pro Guide running Lowrance Strucutre Scan. Where do you have the module mounted in your boat? Electronics locker is tight fit.

[manitobawalleye]

Mine fit in my locker in my Predator tiller. Not sure if our lockers are quite the same but I had to go high as possible and to the right so the fold down tray misses it. Tight but doable, I remove it every winter so its not that bad.

[LLewellin]

Originally Posted by 3 Z's

Anyone with a Lund Pro Guide running Lowrance Strucutre Scan. Where do you have the module mounted in your boat? Electronics locker is tight fit.

I have the 1825 ProGuide and I mounted mine in my battery starting compartment. Its a tight fit but once its in there its done with. Work great.

I have attached a pic of when I first installed it but have since installed a bigger battery and place it in length wise, the opposite of what is in the pic, and moved the single bank charger to a side wall.

[3 Z's]

Thanks for the pic LLEWELLIN. On my 2010 Pro Guide that particular compartment houses the power steer pump. Starting battery is under the floor. I will check out both locations closely.