Home   |  Message Board   |  Information   |  Classifieds   |  Features   |  Video  |  Boat Reviews  |  Boat DIY
Drotto Hook - Page 3 - Walleye Message Central
Walleye Message Central

Go Back   Walleye Message Central > Boats, Motors, Electronics and Trailers > Trailers

Notices

Reply
 
Thread Tools Display Modes
  #21  
Old 02-06-2017, 06:37 AM
FishinFreaks FishinFreaks is offline
Keeper
 
Join Date: Oct 2013
Posts: 232
Default

Quote:
Originally Posted by Johnboy View Post
I agree. It appears the trailer isn't going deep enough.
It could be that the bow roller is too high and is actually lifting some of the weight of his boat off of the bunks.
The boat shouldn't be riding the bow roller that much.
I was actually more thinking the trailer was too deep. If the trailer is the proper depth, your boat should start riding up the bunks, flatten out the boat to the proper horizontal alignment on the trailer, lifting the bow out of the water. Then the bow hook should just slide into the bow roller.

You want to find that perfect spot with the trailer in the water where you're not so deep that the bow rubs the bow roller but you're also not so shallow that there's too much weight/friction on the bunks that you can't get all the way up the trailer.
__________________
Aaron Cavanaugh
Rogers, MN
Reply With Quote
Sponsored Links
Advertisement
 
  #22  
Old 02-06-2017, 06:51 AM
Johnboy Johnboy is offline
Keeper
 
Join Date: Feb 2008
Location: IL
Posts: 475
Default

I absolutely agree with you Aaron. But, if that isn't the problem I think that bow roller height needs to be checked.
Reply With Quote
  #23  
Old 02-06-2017, 05:07 PM
CRNKBT ADDCT CRNKBT ADDCT is offline
Keeper
 
Join Date: Jun 2014
Location: SD
Posts: 202
Default

I usually back it in until about an inch of the top of the fenders are showing.
__________________
Take a fish boating...........

2002 Warrior 1898
200 Yamaha HPDI
T8 Yamaha Kicker
'Bird 1199
'Bird 998
Reply With Quote
 
  #24  
Old 02-06-2017, 05:54 PM
FishinFreaks FishinFreaks is offline
Keeper
 
Join Date: Oct 2013
Posts: 232
Default

Sounds too deep to me. I would try with the water even with the top of the wheels. If it's too dual axle, I would do that on the back wheels.
Reply With Quote
  #25  
Old 02-06-2017, 06:16 PM
CRNKBT ADDCT CRNKBT ADDCT is offline
Keeper
 
Join Date: Jun 2014
Location: SD
Posts: 202
Default

My wheels tuck up into the fenders pretty good. I actually think an inch from the top of the fender is probably close to the top of the wheels. I will have to play with it some. I know at steep ramps it is a beeotch. After looking at it this weekend I think the Drotto latch should work. My roller is the bigger 3-3/4" one. But i think I would like the ranger one that has the small roller attached to the Drotto. I may have to contact them. Heck I might just take it to them and see what they think
__________________
Take a fish boating...........

2002 Warrior 1898
200 Yamaha HPDI
T8 Yamaha Kicker
'Bird 1199
'Bird 998
Reply With Quote
  #26  
Old 02-21-2017, 06:33 PM
CRNKBT ADDCT CRNKBT ADDCT is offline
Keeper
 
Join Date: Jun 2014
Location: SD
Posts: 202
Default

Just an update.

Went to the river Saturday and caught a few. When we loaded the boat I told my buddy not to back it in quite so far...maybe 2 or 3 inches of fender sticking out. It went on the trailer more level with the bow roller but man did it load hard.....

On the plus side of my original question is topped by the shop where the Drotto is made and talked with Darren about what I was originally concerned about. He said it would work without the roller. I bought one and have yet to install it but I can tell you it is an incredibly well made product. I am looking forward to getting it on and using it.

I would say if anybody is thinking about getting one don't wait and do it. I talked to Darren for probably 20 min. He answered every question I had and then some.
__________________
Take a fish boating...........

2002 Warrior 1898
200 Yamaha HPDI
T8 Yamaha Kicker
'Bird 1199
'Bird 998
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:21 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.