Ball mount rattle

[skeeter012]

**** that's rusted if you couldn't bang it out with a heavy hammer. Heat?

[ifish267]

If your in a pinch stop at the hardware store and pick up some wooden or plastic carpenter shims. Tap it in on the top of the ball mount. Works pretty good.

[andreej]

Good luck removing the rusted drawbar. I had one rusted in an older S10. I tried putting a tow strap around the ball, hooked it to a tree and put it in 4wd.... nothing budged! Then I sold the truck!

[Oliverg]

Put a couple pennies in the space

[onebigmother]

I used a metal wedge usually used to secure an ax handle to the head and "tapped" it in place, I used a larger one so half of it sticks out for easy removal. Works for up and down play not sure if it would work for the old in and out.

[tireman]

Curt hitch pins makes a special hitch receiver pin for taking care of your problem. It works i have one. Go on there trailer hitch web site and look under anti rattle hitch pins. I believe reese hitch pins have one also. Good luck.

[dukntz]

I've used a silent

hitch pin by "Let's Go Aero" for several years and it works like a charm! After googling it I see you can get it without the lock also.......