|
#1
|
|||
|
|||
Rebel 1625 XL Tiller vs. Alaskan 1600 Tiller
Looking to get into one of the above boats.
Curious from hearing from any owners of which boat is better in bigger water and the fishability of each. Thanks! |
Sponsored Links | ||
Advertisement | ||
|
#2
|
|||
|
|||
Boats
The Alaskan has more open floor space for the size you are talking about, but if I remember right the floor plans are significantly different. I think they weight is about the same. Do a search on each boat and you will get some info, then take a look at the Lund homepage and compare the layouts. The Rebel probably has more storage space and a casting deck. It might boil down to just personal preference. I really like my Alaskan, but I see plenty of Rebels out there. PM me is you have any questions. Both great boats.
|
#3
|
||||
|
||||
They both should do okay in bigger water. It's not going to ride like an 1825 Pro Guide, but should do fine. The Rebel is 3" wider, which will provide some additional stability.
Both have a 60 Hp rating, both have IPS hulls. It really comes down to price and layout. The Rebel has more storage, and I like the livewell centered on the bow vs the port side for Alaskan. That gives the XL one additional rod locker, and has more storage under the bow. Both good boats, I would spend 5-10 minutes inside of each and see which one you like better. |
Sponsored Links | ||
Advertisement | ||
|
#4
|
|||
|
|||
Alaskan
I have a 1600 Alaskan with the side console and a 60 hp 4 stroke Merc. I like mine two biggest reasons being open floor space and down inside with high free boards. Depends on your style of fishing and what make you comfortable. Both are excellent boats. I have had mine for a year no problems with rough water and never have felt unsafe. Have fished alone, with 2 in boat and fished a week with 3 in boat. Everyone was comfortable and had plenty of room. Alone top speed 34, 2 on board 32, and with 3 on board livewell full and everbodys gear 30 mph. With three on board need to move guy in back ahead to middle seat to get up on plane faster. I have a cable steer trolling motor because I like the quick steering and the pedal. Downside though is the stiff cable makes is difficult to keep the pedal where you want it on the floor. Cable steer would be better suited for casting decks. I am not a fan of casting decks and use my tolling motor for positioning and moving around stumps and rocks If I want to troll I use the big motor. Wind does push boat around with the high freeboards. Either choice will be a good boat. Storage compartments in Alaskan are not dry so if you need to keep something completely dry put in good containers. LOL
|
Thread Tools | |
Display Modes | |
|
|