Wiring a Stratos 476 sf

[green1320]

I just bought a stratos 476 sf and want to put a sonar at the console and at the bow. What is the best way to run transducer cables and power to these locations. Thanks

[REW]

If installation pipes are available, run the wiring through the installation pipes that are located in the gunnel area of the boat.

If no pipes, then use a stiff wire, or flexible rod to push the wire and or pull rope through the gunnel, to the console and through the gunnel through to the bow area.

Depending on the boat, you may have to deal with foamed in insulation.

Good luck