|
#41
|
|||
|
|||
I had that same prop on my 2010 as well and it was perfect, that whole boat was perfect. That's why I'm so surprised to see such a change in performance. Granted the hull is 3" wider and 6" longer but the claims by kind were that this hull will produce better performance and a better ride than the 2010.
I did notice that one the starboard side of the centre line the hull was a little bit rounded in right where the hull meets the transom right on the centre flat spot. It's rounded in (quite obviously from factory) where the other side is perfect and flat. I wonder if this could be the root of it? |
Sponsored Links | ||
Advertisement | ||
|
#42
|
|||
|
|||
Quote:
If you think the problem is in the boat you'd better have the dealer take a look at it. Now is a great time, as it is slow in most dealerships. |
#43
|
|||
|
|||
Yes, concave. Almost like the frammofnthe transom was bent so when the put the rivets in the hull took the same shape.
|
#44
|
|||
|
|||
Not sure what you have going on there... but there is no "frame" in the transom.
Take it to your dealer for evaluation. If it is a manufacturing issue, you have warranty. Do this now in case something needs to be addressed. Time is always a factor. |
#45
|
|||
|
|||
Quote:
i do know i fished 4 days on a full tank and had 1/4 left before i had the merc monitor installed
__________________
2016 2075 Lund Proguide 200hp verado |
Tags |
big tiller , pro guide , trim , verado |
Thread Tools | |
Display Modes | |
|
|