Bow mount trolling motor prop ?

[rngrwpn]

I know that there are 3 blade props available for my trolling motor - can anyone tell me the advantage/disadvantage? When would I use each? Is it worth it?

My assumption/little understanding assumes:
2 blade is better for working in weeds
3 blade is better for trolling applications as it pulls the boat better due to having more prop surface area

[Owen]

Originally Posted by rngrwpn

I know that there are 3 blade props available for my trolling motor - can anyone tell me the advantage/disadvantage? When would I use each? Is it worth it?

My assumption/little understanding assumes:
2 blade is better for working in weeds
3 blade is better for trolling applications as it pulls the boat better due to having more prop surface area

probably hard to find this info, but you would need to look at things like pitch, and diameter to make a real comparison.

[Kevin23]

Theres info on the 3 blade on here and crappie.com. Consensus is that it makes no difference at all. You gain nothing with the 3 blade.


Sent from my iPhone using Tapatalk

[REW]

http://www.motorguide.com/store/accessories/propellers

http://mk.factoryoutletstore.com/cat...ent-Props.html

[Lastflight]

I was just about to start a thread about this exact topic.

I do 95% of my trolling motor use in open (weed free) water for both trolling and vertical jigging. With all of the technology out there for outboard props I am surprised that there isn't more out there for electric motors.

What I am really looking for is an improvement in efficiency, mainly battery draw and to a lesser extent speed.

Does anyone have any real-world experience with some of the aftermarket props that are available?

[rngrwpn]

Same here - 95% is open water - often using the bow mount to steer while the kicker is on or just the bow mount when pulling spinners/slow death or rigging.

The site says quieter/faster/shallower - than what though? Than their 2 blade? Than a competitor? Website words are of no help.

Visited crappie.com and found some info - all say no difference from what they can tell. I think battery life would be hard to tell as so many variables go into it. But speed, ability to turn, anchor mode in current and such should be measurable from the experience - I do wish knowing if it is quieter or not - that would be great.

[Hot Runr Guy]

Take a minute to read this:

https://www.walleyecentral.com/forums...ht=Kipawa+test

HRG

[Lastflight]

Thanks for the link HRG. That seems to be the main aftermarket prop out there. From the data is appears to be a wash with the other props.

[Kevin23]

If you want quieter and less vibrations, try the aftermarket prop nuts. The bass guys swear by them, I guess they balance out the prop and reduce chatter when running at high speeds.

[reefhawg]

I have also looked at the aftermarket prop nut, looks like a great idea! My only question is will the weight effect the operation of the automatic stow and deploy of the Minn Kota Ulterra? They say this will take away all vibrations, be quieter, and make the trolling motor run more efficient for longer lasting battery life. Anybody on here running this aftermarket prop nut?
http://thmarine.com/g-force-eliminat...motor-prop-nut