Lowrance Help

[TeamWalleyePatrol]

So here is the run down I just bought a lowrance 28c hd and Lowrance 5300c global map. Both units I want to have mounted side by side on the console. I have no power wires or cables for these units other then a gps puck with a red connector wire. I also have for the bow a lowrance lms 522c. Which the transducer for that will be run off of my minn kota terrova with ipilot? What cables and wires do I need to hook these units up and What are the serial numbers and such so I can track them down. Can you network all these units together at all? Any Help would be great...

[Oahe MrL]

Joe,
I'd consult the Lowrance websites. This link shows what Lowrance units are NMEA compatible.

http://www.lowrance.com/Products/Mar...nits-Displays/

Here' a link to Lowrance accessories. The power cables are there. Check the connector colors.

http://store.navico.com/Accessories-...ables-Lowrance


Good luck.

[TeamWalleyePatrol]

Thanks for the links martin some good stuff there. however like I said I have a 28c hd with a red end and my gps puck has the same end. like they are both female or something. Is this common or is there an adapter cable for that..

[perchjerker]

pretty sure you are going to need a "T" connector. It has male ends on the top part of the "T" , you hook your unit and the gps ant into that, then you will need a cable that will power up the network, that will go into the bottom of the "T" and the other end of that connects to your battery

its all explained on the Lowrance website, I have the same setup but its been a few years since I hooked it up and thye boat is in storage so I cant look at irt for you but I think thats what you need