|
|
|
#1
|
|||
|
|||
|
I am having a problem keeping it running once it starts.
Only runs for 5 or 10 seconds. I have new gas,new plugs,new oil and filter. It has water coming out of the impeller when running. Any suggestions would be great. Thanks Guys! |
| Sponsored Links | ||
Advertisement | ||
|
#2
|
|||
|
|||
|
I would first check that your fuel tank vent is not plugged. Try running the motor with the cap loose
|
|
#3
|
||||
|
||||
|
Is the primer ball staying hard? Check for leaks around any fuel line leaks?
|
|
#4
|
|||
|
|||
|
Make sure fuel valve is open, mine was partially closed when I bought it so when I gave it more throttle it would quit running. After alot of effort it was as simple as a fuel valve underneath the floor.
|
|
#5
|
|||
|
|||
|
I've had the same problem, carb is a bit dirty. Try running seafoam through it and turn your idle up a bit while running the sea foam throgh the motor, or clean the carb.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|