Changing bearings and hub

[c21fishing]

so this is 3 questions

changing my 1 hub and all bearings
1 so on the side the hub is getting changed the back bearing wont slip of becuase the spindale seems to be scored a bit . what should i do

2 the side that i will just reolace the bearings do i have to remove the inner cone where the bearing sits in its smooth i dont feel any scoring

3 i put the seal on flush with the hub now should that inner bearing beable to move arond .

[perchjerker]

Originally Posted by c21fishing

so this is 3 questions

changing my 1 hub and all bearings
1 so on the side the hub is getting changed the back bearing wont slip of becuase the spindale seems to be scored a bit . what should i do

Use some emery cloth to remove the score

2 the side that i will just reolace the bearings do i have to remove the inner cone where the bearing sits in its smooth i dont feel any scoring

You should replace the cone with the bearing as a set

3 i put the seal on flush with the hub now should that inner bearing beable to move arond
yes

hope this helps

[c21fishing]

thanks