Walleye Message Central

Walleye Message Central (https://www.walleyecentral.com/forums/index.php)
-   Boats (https://www.walleyecentral.com/forums/forumdisplay.php?f=32)
-   -   Track mount Fender holders? (https://www.walleyecentral.com/forums/showthread.php?t=726616)

Dbars19 09-09-2021 12:28 AM

Track mount Fender holders?
 
Whats out there that mounts on track mounts and is able to hold a fender? I cant seem to find anything for tracks. I saw something that is a little clip that attaches to the fender rope, then that clip attaches to an adaptor on the track. anyone have any ideas? thx

REW 09-09-2021 04:54 AM

Dbars,
Easy.

Mount your rod holders on the tracks and hang the fenders from the rod holders. I do this all of the time and it works wonderfully well.

If I am fishing, the rod holders are already in place so, it is a zero preparation option.

But, if I am not fishing, I only need fenders on one side so it takes about 12 seconds to mount a rod holder to hang a fender if the need arises.

Take care

But, if you don't want to mount a rod holder, just take a rod holder mount that fits your track, and mount an eye bolt in the holder and use the eye bolt to hang your fender.

Hot Runr Guy 09-09-2021 06:15 AM

1 Attachment(s)
I've mounted a small plastic cleat to SportTrak brackets, so I can move them and hang fenders where I need them.

HRG

Swarwick 09-09-2021 06:46 AM

[QUOTE=Dbars19;6595716]Whats out there that mounts on track mounts and is able to hold a fender? I cant seem to find anything for tracks. I saw something that is a little clip that attaches to the fender rope, then that clip attaches to an adaptor on the track. anyone have any ideas? thx[/QUOTE]


Cisco makes a cleat to fit in tracks.


Sent from my iPhone using Tapatalk

MauroC 09-09-2021 08:01 AM

For my Lund impact I purchased a little button that mounts on the track. The bumper gets a piece that slides over the button. It works great. I purchased them as a Lund accessory from my dealer


Sent from my iPhone using Tapatalk

bloodman 09-09-2021 10:55 AM

Traxtech

jdavis 09-09-2021 11:28 AM

[QUOTE=MauroC;6595766]For my Lund impact I purchased a little button that mounts on the track. The bumper gets a piece that slides over the button. It works great. I purchased them as a Lund accessory from my dealer


Sent from my iPhone using Tapatalk[/QUOTE]

I got the same ones. I really like them. You can see them here on Amazon, they were about $15 cheaper when I bought mine.

[url]https://www.amazon.com/gp/product/B07D1PTDVK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1[/url]

FlyNorth 09-09-2021 12:27 PM

[QUOTE=MauroC;6595766]For my Lund impact I purchased a little button that mounts on the track. The bumper gets a piece that slides over the button. It works great. I purchased them as a Lund accessory from my dealer


Sent from my iPhone using Tapatalk[/QUOTE]

I use too, they work great!

FN

therealjoeblow 09-09-2021 08:10 PM

1 Attachment(s)
I made my own version of something similar to the Lund ones using stainless T-bolts (M8 size) and some 7-star bakelite knobs that have brass inserts, plus a nylon washer to keep it from scratching the track when tightened. Bought all the stuff on e-bay, enough to make about a dozen at a cost of <$3 each. Can handle up to 3/8" rope slung over it easily. I attached a photo of the mock-up I made in my living room and the parts bags.

Cheers
TRJB

TMF89 09-10-2021 05:01 PM

[url]https://jerrysboatscatalog.com/product/lund-bumper-strap[/url]

These things are fantastic (they replaced the screwdriver/button one Lund made). I have one for each fender, and also for both drift socks. Super easy to use.


All times are GMT -6. The time now is 05:52 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.