Walleye Message Central

Walleye Message Central (https://www.walleyecentral.com/forums/index.php)
-   Electronics (https://www.walleyecentral.com/forums/forumdisplay.php?f=34)
-   -   Let's see your electronics install (https://www.walleyecentral.com/forums/showthread.php?t=436138)

Hot Runr Guy 03-26-2015 07:40 AM

Let's see your electronics install
 
At this time of year, with new boats being delivered, there always seems to be questions of what will fit or what type of mount?

Maybe, if we ask pretty please, this thread can be pinned to the top of the Electronics forum, so there is an easy to find repository of pictures.

Let's get this started,,,,,,

Hot Runr Guy 03-26-2015 07:42 AM

H'bird 958c HD DI Lund 1650 Rebel XL tiller
 
1 Attachment(s)
using a Ram 109V mount.

HRG

Kyle Posterick 03-26-2015 07:53 AM

Here is mine:

[URL="http://s1368.photobucket.com/user/Kyle_Posterick/media/Grpahs_zpsoqk1y3bk.jpg.html"][IMG]http://i1368.photobucket.com/albums/ag171/Kyle_Posterick/Grpahs_zpsoqk1y3bk.jpg[/IMG][/URL]

[URL="http://s1368.photobucket.com/user/Kyle_Posterick/media/Bow_zpsyw6idgcc.jpg.html"][IMG]http://i1368.photobucket.com/albums/ag171/Kyle_Posterick/Bow_zpsyw6idgcc.jpg[/IMG][/URL]

998, 859, I link terrova, 859 is set up to move between the front and back as I need.

Ethernet and fuse block is in the electronics locker lund provided.

matzilla 03-26-2015 07:54 AM

1 Attachment(s)
Helix 5 di/gps on my old Alumacraft Competitor

Jtracc 03-26-2015 08:27 AM

1 Attachment(s)
[ATTACH]140690[/ATTACH][QUOTE=Hot Runr Guy;3693738]At this time of year, with new boats being delivered, there always seems to be questions of what will fit or what type of mount?

Maybe, if we ask pretty please, this thread can be pinned to the top of the Electronics forum, so there is an easy to find repository of pictures.

Let's get this started,,,,,,[/QUOTE]

HDI 7 install at the wheel...

Jtracc 03-26-2015 08:31 AM

1 Attachment(s)
Another

westfield 03-26-2015 09:00 AM

Itroll custom mount

Timing 03-26-2015 09:15 AM

Do not have pic but mount smaller graph over top of large graph, IMO easy to read both at same time.

Born 2 fish 03-26-2015 09:31 AM

1 Attachment(s)
1199 on a Cisco mount on dash of a 2014 1875 impact sport

Born 2 fish 03-26-2015 09:33 AM

2 Attachment(s)
Three Transducer set up.

codeblue 03-26-2015 12:42 PM

1 Attachment(s)
Humminbird Onix 10 on a Cisco mount---- Yarcraft 186tfx dash

mrwalleye5 03-26-2015 12:57 PM

2 Attachment(s)
Can be adjusted to be very close to you and then able to fold down into electronics locker for security.

wallijig 03-26-2015 01:39 PM

82 Attachment(s)
This is what I have now at console and HDS 9 touch at trolling motor.
I am going to switch the two HDS 7's soon as my two HDS 9 gen3 arrive.

Rich_K 03-26-2015 04:37 PM

[QUOTE=Born 2 fish;3694362]Transducer set up[/QUOTE]

I've seen a lot of talk here and elsewhere on the net about whether or not certain transducers can keep an accurate depth reading at high speed. It looks like you've got 2 transducers. Did both of them come with the 1199 and why are there 2?

Thanks,

Rich

pale ryder 03-26-2015 05:23 PM

3 Attachment(s)
HB 898s on Rock Solid mounts one at the bow one at console. And HDSI transducer mounted to motor.

sfw1960 03-26-2015 06:29 PM

2 Attachment(s)
'91 Lowe 1730V W/T.
Dash:
998c HDSI
Bow currently occupied with HB 899ci HDSI and 798ci SI, a RAM-109V and 859ci HD taking it's place (798) as soon as the ice bites the big one!!
The gen 1 i-Pilot will be finding a new "home" and the i-Pilot Link is replacing it.
The 1st 2D [I]only [/I]machine I have owned in about 7 years! It networks, so I should have the ability to split SI beams between the 899/859 for 1600 pixels of side imaging goodness.
:)

I'll try to update when the last wires have been tucked and all is buttoned down well.

reddog 03-26-2015 07:47 PM

139 Attachment(s)
WX 1850 with Ram Swing arms on 1100 series Humminbirds.

San Chan 03-26-2015 08:01 PM

132 Attachment(s)
Use Cannon mount that wasn't designed for my application but need the pivot function to swing the mount so I can cover the boat~cover.

Pezman38 03-26-2015 08:11 PM

Ranger 2050vs Reata with an HDS 8 on a cisco.
[URL=http://s992.photobucket.com/user/pezman38/media/Boat%20updates/IMAG0553_zpsb03e6a6f.jpg.html][IMG]http://i992.photobucket.com/albums/af43/pezman38/Boat%20updates/IMAG0553_zpsb03e6a6f.jpg[/IMG][/URL]

Extra Cisco plate mounted on the stern for trolling, and bow HDS7 transferred.
[URL=http://s992.photobucket.com/user/pezman38/media/Boat%20updates/LED%20placement2_zpsnlclhanv.png.html][IMG]http://i992.photobucket.com/albums/af43/pezman38/Boat%20updates/LED%20placement2_zpsnlclhanv.png[/IMG][/URL]

Thembonez 03-27-2015 12:52 AM

1 Attachment(s)
Gen 2 T9 and gen2 5

imageconceptz 03-27-2015 01:21 PM

1 Attachment(s)
The view from my marine office... :-)

sfw1960 03-27-2015 04:37 PM

Nice!

:thumbsup:

Keep'M comin' boyz!!

:)

mrmatt 03-27-2015 05:49 PM

Love this idea for a thread and fully support getting it stickied at the top, nice to see how others are setting their gear up.

I can't seem to find any pictures of the setup that was in my 16' warrior tiller - just a 898c si on a RAM mount. Should be getting the Triton Allure 186 in a couple weeks so I'll toss some pictures of that up when I get it. Will have a HDS 7 Gen3 on a 2.25" RAM at the console and a HDS 7 Gen2 Touch on a Cisco mount at the bow.

DaHunt 03-27-2015 07:25 PM

3 Attachment(s)
Lowrance 12" Gen3 on a Lund Fisherman 1800 using a balZout 6" mount

SLE 03-27-2015 07:42 PM

1 Attachment(s)
HDS 8 stacked over top an HDS 7 at the console, both on ram mounts. HDS 8 at bow on JohnnyRay mount (tough to see in the picture).

[ATTACH]141618[/ATTACH]

Lunddude 03-27-2015 08:41 PM

[QUOTE=DaHunt;3701434]Lowrance 12" Gen3 on a Lund Fisherman 1800 using a balZout 6" mount[/QUOTE]

That's a slick looking mount!

Grey Ghost 03-28-2015 04:02 PM

1 Attachment(s)
The Gray Ghost

fishinmaniac 03-28-2015 06:22 PM

3 Attachment(s)
Here's my birds @ the console. Have one on the bow too, all networked To ilpilot.

Rapscallion 03-28-2015 06:52 PM

1 Attachment(s)
HDS 5's on Ram mounts.

JOHN L. HECKLSMILLER 03-28-2015 09:27 PM

2001/Lund 1800 Tiller
 
5 Attachment(s)
[FONT=Arial Black]#1. Tiller Console--Lowrance LCX104c/Ram Mount[/FONT]
[FONT=Arial Black]#2. Bow--Lowrance LCX27c/Ram Mount[/FONT]
[FONT=Arial Black]#3. Starboard Gunnel--Lowrance LCX19c/Ram Mount[/FONT]

Gregking 03-28-2015 09:37 PM

2013

Shellback 03-29-2015 06:09 AM

1 Attachment(s)
Here's mine 2013 Alaskan 1600 tiller, with a pair of Garmin Echomap 70's and the GVC-10 side and down scan.

Gregking 03-29-2015 08:57 AM

1 Attachment(s)
Forgot pic

Gregking 03-29-2015 09:02 AM

1 Attachment(s)
Last season I went 100% birds

AnkenyIANate 03-29-2015 09:10 AM

Cockpit view
 
1 Attachment(s)
It was fun trying to fit everything.

troutbeer 03-29-2015 09:24 AM

I have a73DV that I will be mounting to a Lund Alaskan within the next month. I am debating between a mount similar to Shellback's and Hot Runr Guy's. I can either have the unit on a swing arm mounted on the rear/port, or on the rod locker on the starboard. The swing arm mount seems appealing because as I'm trolling I will be fishing and facing the port side with my rod in a holder or in my right hand. A glance down will let me see the screen without cranking my head to the right. The other option (like Shellback's) would have easy viewing and access while facing front and the controls would be at my fingertips.

Any suggestions from you tiller guys on where you have yours mounted and why you like it that way?

Thanks.

Juls 03-29-2015 09:29 AM

1 Attachment(s)
2015 (2) Onix install on 621FS

Brad L. 03-29-2015 10:48 AM

27 Attachment(s)
Install on my 2012 Ultima that I did in October when I added an HDS9 along with Gofree wifi module, point 1 antenna, nmea 2000 network, & ethernet. Along with structure scan transducer.
Then traded the boat end of january when ordered a new one...all electronics were transfered to the new ride! :-)

Lunddude 03-29-2015 11:16 AM

[QUOTE=Shellback;3705562]Here's mine 2013 Alaskan 1600 tiller, with a pair of Garmin Echomap 70's and the GVC-10 side and down scan.[/QUOTE]

Did you make that mounting bracket?

Shellback 03-29-2015 12:00 PM

1 Attachment(s)
[QUOTE=Lunddude;3706866]Did you make that mounting bracket?[/QUOTE]

My son did it at his work place.


All times are GMT -6. The time now is 03:09 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.