Sounds about right. I have a Honda 150 on an 1800 Pro-V Lund and it has a 14.75 x 18" 3 blade Stainless. It is just a little sluggish out of the hole and never gets over 5800 RPM. If your RPMs don't come up to close to 6000 with the new prop but show less than 5000 yet, check the setting on the back of the tach as ltrain indicated. It may be set for a 6 cylinder and the Honda is a 4, . My Pro-v will hit about 48 MPH with GPS on a good day with a lite load.
|