Home   |  Message Board   |  Information   |  Classifieds   |  Features   |  Video  |  Boat Reviews  |  Boat DIY
Walleye Message Central - View Single Post - Vessel View Mobile
View Single Post
  #7  
Old 10-08-2018, 08:46 PM
Farmerj's Avatar
Farmerj Farmerj is offline
Keeper
 
Join Date: Jul 2018
Location: Meeker County, MN
Posts: 377
Default

Quote:
Originally Posted by Hot Runr Guy View Post
Smartcraft architecture requires the use of 1 or 2 termination resistors (depending on size) somewhere in the circuit. When the VVM is plugged directly into the powerhead, the TR is moved to the 2nd lead. When the VVM is plugged into a multi-port junction block, there is probably a TR already in the circuit, so the 2nd lead remains capped off.

Smartcraft data cables that have yellow "bands" near the connectors have a termination resistor built into that end of the cable.

HRG
I haven't installed vessel view yet because I want the harness and sensors for water temp and pressure and fuel pressure.

No one seems to have much information on those as well
Reply With Quote