2 Sonar Units on Lund Impact Console.

[buckeye1]

Originally Posted by Boondock

Ram swing arm works great if you don’t want to spend $100-$300 for a Mount

That is one I am considering.

[7 Mag]

Originally Posted by Boondock

Ram swing arm works great if you don’t want to spend $100-$300 for a Mount

Thanks I hadn’t seen those.

[sandylee]

Two Ram 109 swingarm mounts side by side.

[Ltrain]

What's length of swing arm and do the mounting holes line up with the ram 2.5 inch ball?

[sandylee]

The Ram Swing arm mounts I have are the 109HS (I think) and they have a 6" straight arm. The curved arm would not work with my boat as the graphs would hit the windshield. The hole pattern is bigger so your old holes would be covered up. I now have two HDS 9" side by side.

[Ltrain]

Originally Posted by sandylee

The Ram Swing arm mounts I have are the 109HS (I think) and they have a 6" straight arm. The curved arm would not work with my boat as the graphs would hit the windshield. The hole pattern is bigger so your old holes would be covered up. I now have two HDS 9" side by side.

Thank you

[djcoop52]

1775 Impact here with the SC did not like mine on the dash to me interfered to much with my frontal vision moved mine down to the flat area just next to the console on a ram mount short mount with the large balls plus now when i take the windshield off to put cover on I am able to swing finder down along dash and not interfere with the cover. I always lay it down when traveling cover or not. You could put one there and one on the dash still very easy to see when driving.