2001 2025 Lund Livewell Issue
Yesterday while out on the water noticed that the livewell did not fill propertly (less than a 1/4 full). I tried the switch on console in the manual and auto position, could hear the water coming in(on the back left wall). Also moved valve from empty to fill and then to recirulate, "still did not hold water". Inside the livewell there is a pvc pipe in the middle of the two sceened outlets, directly across from the pvc pipe hole there is another hole with nothing in it(not sure what that hole is there for). I have 2 water supply inlets, one on the back left wall and the other directly in front of the main motor on the inside of the livewell wall " I've never had that one working and not sure how to use it. I also have 2 baitwells on the boat most of the time I use at least one (mainly the one in the back next to the livewell, the other is in the front of the drivers windshield). Would it be safe to say that one of the valves isn't holding or not shutting fully. Is there some way I can check these valve's, if so how can I get to them. Should both water inlets be feeding the tank at the same time. Could there be more than one pump feeding this system. Would really appreciate it if someone could explain this system to me. I'm not sure if I'm using it right, even the pvc pipe in the livewell could be wrong.
Thanks in advance