Home   |  Message Board   |  Information   |  Classifieds   |  Features   |  Video  |  Boat Reviews  |  Boat DIY
wire ? - Walleye Message Central
Walleye Message Central

Go Back   Walleye Message Central > Boats, Motors, Electronics and Trailers > Electronics

Reply
 
Thread Tools Display Modes
  #1  
Old 07-15-2019, 11:18 AM
walleye571 walleye571 is offline
Wallhanger
 
Join Date: Jul 2010
Location: Michigan
Posts: 826
Default wire ?

I am wiring two of these, is 18 ga wire good?

https://www.amazon.com/AMBOTHER-1280...%2C211&sr=8-11
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old 07-15-2019, 02:07 PM
Marty59 Marty59 is online now
Wallhanger
 
Join Date: Jul 2012
Location: Michigan
Posts: 2,601
Default

No! See chart. Depends on the length of the wire to battery.

Marty
Attached Files
File Type: pdf Wire size.pdf (33.1 KB, 72 views)
Reply With Quote
  #3  
Old 07-15-2019, 03:29 PM
mikear mikear is offline
Keeper
 
Join Date: Apr 2015
Location: Oklahoma
Posts: 436
Default

Those lights are 120W each. So 120W / 12V = 10 amps each.

If your wire length from your fuse block to the panel is 20 feet, then you need #14 AWG for 1 light or #8 AWG for both.

If running one light per circuit, 14 AWG will require a 15 amp fuse. If you run both on 8 AWG I would use a 25 amp fuse.
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old 07-15-2019, 03:49 PM
Kevin23 Kevin23 is offline
Wallhanger
 
Join Date: Dec 2014
Posts: 2,205
Default

Those things pull some serious juice! Definitely no to 18ga. I would wire them together up front, then run 8/2 marine wire back to the battery and install a 30A breaker right before the battery... switch in the middle wherever you need it. Make sure its a big switch, most standard boat switches are only 10 or 15A and will not work in your application.
Reply With Quote
  #5  
Old 07-15-2019, 04:07 PM
Huntindave Huntindave is offline
Charter Member
 
Join Date: May 2002
Location: IOWA.
Posts: 2,288
Default

Quote:
Originally Posted by mikear View Post
Those lights are 120W each. So 120W / 12V = 10 amps each.

If your wire length from your fuse block to the panel is 20 feet, then you need #14 AWG for 1 light or #8 AWG for both.

If running one light per circuit, 14 AWG will require a 15 amp fuse. If you run both on 8 AWG I would use a 25 amp fuse.
(A) The link says 60 watts each
Features:

Lumen: 12800 LM (6400LM Each)
Working Voltage: DC 9-30V
Wattage: 60W (120W Total)
Color Temperature: 6000K (White Light)
Light Beam: Spot & Flood
Life Span: 100,000H
LED Type: 5050 SMD-LED
Material: Diecast Aluminium Housing
Mounting Bracket: Adjustable Angle
Bolts Diameter 0.28in, Length 0.95, 0.55
Reply With Quote
  #6  
Old 07-15-2019, 04:38 PM
Paul H Paul H is online now
Charter Member
 
Join Date: Mar 2002
Location: Zanesville OH
Posts: 1,245
Default

Like any of the Chinese electronic junk - take 60W each with a big grain of salt. It was not that long ago when total alternator output was 35w and no a few hundred is max.

I'd guess they actually pull less than 4-5 watts at 12v. But 18 ga. is too small for most anything.

I have 2 very similar to these, one is used as a back up light, the other is on a magnet mount and hooked to a cigarette lighter plug.

Last edited by Paul H; 07-15-2019 at 04:41 PM.
Reply With Quote
  #7  
Old 07-15-2019, 05:18 PM
mikear mikear is offline
Keeper
 
Join Date: Apr 2015
Location: Oklahoma
Posts: 436
Default

Quote:
Originally Posted by Huntindave View Post
(A) The link says 60 watts each

Features:



Lumen: 12800 LM (6400LM Each)

Working Voltage: DC 9-30V

Wattage: 60W (120W Total)

Color Temperature: 6000K (White Light)

Light Beam: Spot & Flood

Life Span: 100,000H

LED Type: 5050 SMD-LED

Material: Diecast Aluminium Housing

Mounting Bracket: Adjustable Angle

Bolts Diameter 0.28in, Length 0.95, 0.55


I missed that part, thanks.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:11 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.