Advice on mounting support for Onix on console

[sandylee]

I can fit a pair of Lowrance 7's or 9's together or one of each is what I normally do. I have the same mounts on bow of boat.

[Kevin23]

Noticed the other day that my dealer put a 1/8" hard alum plate under my dash for electronics support.

[defiant0ne]

Originally Posted by sandylee

I can fit a pair of Lowrance 7's or 9's together or one of each is what I normally do. I have the same mounts on bow of boat.

Do you have the model number of those RAM mounts you used?

d1

[sandylee]

I think they are 109-HSB. They are straight arms, the Ram 109H-4U with curved upward arms I originally purchased would not work with two graphs. I use the curved ones up front on bow with the curve facing down so it doesn't block my sight traveling.

[defiant0ne]

Originally Posted by sandylee

I think they are 109-HSB. They are straight arms, the Ram 109H-4U with curved upward arms I originally purchased would not work with two graphs. I use the curved ones up front on bow with the curve facing down so it doesn't block my sight traveling.

Thanks, I like your setup better than mine. I have the regular RAM ball mount with the double socket arms. I mounted my 2 electronics side by side like yours (with two separate double socket arms), but there is more movement/flex than I would like to see. I really have to torque them down to minimize any movement.

d1

[sneakylunker]

I have an Onix 8 and 10 on the dash. Here is just the 10.

[Wavemaker]

Onix 8 on Cisco mount. I bought a extra mounting plate and used that as backing under the dash.