WANTED- Butt seat and/or a pedestal to fit Lund 2 3/8" base

[Plotman]

Looking for a butt seat and/or pedestal that will fit the 2 3/8" bases in the floor of my Lund. I believe these are referred to as the "238 series" which have the small locking slot for the pedestal. Would also be interested if anyone knows of an adapter to fit the 3/4" pin pedestals into my bases. Obviously under $500.

[Twodogs]

I'm almost positive Springfield makes king pin adapter for the 2 3/8"base to use a 3/4" pin pedestal.

[Plotman]

Originally Posted by Twodogs

I'm almost positive Springfield makes king pin adapter for the 2 3/8"base to use a 3/4" pin pedestal.

I have found the 1.77" round to 3/4" pin, as well as the taper lock wedge to 3/4" pin but, the only 2 3/8" round to 3/4" pin adapter I found was by a company no longer in buisness. Seems there would be demand for something that appears inexpensive and simple to build.

[Twodogs]

This is what I was thinking would work...I used them in my Lund Pro V few years back.


http://www.iboats.com/Hi-Lo-Bushing-...view_id.342137

[Plotman]

Originally Posted by Twodogs

This is what I was thinking would work...I used them in my Lund Pro V few years back.


http://www.iboats.com/Hi-Lo-Bushing-...view_id.342137

Somehow missed seeing those. Will definately open up some possibilities in the event I cannot find a used 2 3/8". Hate to buy new however, my son has had surgery on both hips and needs the added elevation to relieve the pain.