Home   |  Message Board   |  Information   |  Classifieds   |  Features   |  Video  |  Boat Reviews  |  Boat DIY
Bullseye Boat Loader - Page 2 - Walleye Message Central
Walleye Message Central

Go Back   Walleye Message Central > Boats, Motors, Electronics and Trailers > Trailers and Tow Vehicles

Reply
 
Thread Tools Display Modes
  #11  
Old 08-09-2021, 06:32 AM
Timmer92 Timmer92 is offline
Keeper
 
Join Date: Dec 2011
Location: MN - Twin Cities, North Metro
Posts: 231
Default

Many posts are straying a bit from the OP intent. I'm glad he found a product that he likes enough to share it here.
__________________
Timmer
All of the tools, some of the skills!

Last edited by Timmer92; 08-09-2021 at 06:41 AM.
Reply With Quote
Sponsored Links
Advertisement
 
  #12  
Old 08-13-2021, 06:01 PM
abster71 abster71 is offline
Minnow
 
Join Date: Mar 2009
Posts: 24
Default guides

I had an issue with mine drifting as i pulled out off river current landings only an inch or so and it was close enough to possible rub on fender. Did a lot of research and went with the bullseye also just installed the back set and it comes out of the water perfect every time. Great product, not sure why there is so much bashing going on when someone finds a good product that may help someone else out. As far as trailer not being setup properly it all depends on the boat. Yes the rangers load well without anything but look at the hull of a ranger and compare that to a flat bottom or semi V, not everyone fish's out of a 70,000 plus boat!!!!!!!!!!!
Reply With Quote
  #13  
Old 08-14-2021, 09:57 AM
SJC305 SJC305 is offline
Minnow
 
Join Date: Aug 2020
Location: Central Ohio
Posts: 50
Default

Completed my trip to Devils lake over a week ago and the first thing I did after getting home was buy a set of Bullseye's. Every time we pulled my boat out of the water, it would be sitting on the fender. Putting the boat back into the lake and centering it got old after day 3.....

I ordered the "Lund Kit" and are still waiting for it to ship out. Can't wait to get it installed and be done with repeated centering on the Shorelander trailer.
__________________
Fish the Northland
1875 Impact XS
150 Merc 4S
Helix 9 MSI G4N
Helix 7 MDI G3N
Reply With Quote
Sponsored Links
Advertisement
 
  #14  
Old 08-14-2021, 10:09 AM
WoodinvilleWalleye WoodinvilleWalleye is offline
Minnow
 
Join Date: May 2020
Location: Washington
Posts: 63
Default

Quote:
Originally Posted by SJC305 View Post
Completed my trip to Devils lake over a week ago and the first thing I did after getting home was buy a set of Bullseye's. Every time we pulled my boat out of the water, it would be sitting on the fender. Putting the boat back into the lake and centering it got old after day 3.....

I ordered the "Lund Kit" and are still waiting for it to ship out. Can't wait to get it installed and be done with repeated centering on the Shorelander trailer.
I have the Lund Kit as well, and it's really nice. He's gone to pre-drilling the holes in the support bars now so that you don't have to do that step. Now you just assemble, position on the trailer and tighten. I got a set both last year and this year, and the pre-drilling was one of the changes he made.
Reply With Quote
  #15  
Old 08-14-2021, 06:48 PM
Daddybigfins Daddybigfins is offline
Keeper
 
Join Date: Feb 2014
Location: Park County, MT
Posts: 371
Default

Quote:
Originally Posted by Timmer92 View Post
Many posts are straying a bit from the OP intent. I'm glad he found a product that he likes enough to share it here.
Sign of the times-
Someone makes a sincere recommendation on a product to solve a problem and people high jack the thread to proclaim we should buy a certain brand of boat and trailer.
__________________
DaddyBigFins
Reply With Quote
  #16  
Old Yesterday, 07:48 AM
SJC305 SJC305 is offline
Minnow
 
Join Date: Aug 2020
Location: Central Ohio
Posts: 50
Smile

Quote:
Originally Posted by WoodinvilleWalleye View Post
I have the Lund Kit as well, and it's really nice. He's gone to pre-drilling the holes in the support bars now so that you don't have to do that step. Now you just assemble, position on the trailer and tighten. I got a set both last year and this year, and the pre-drilling was one of the changes he made.
You were dead on sir! I had tried to center the boat as best as possible on the last loading, but was a little to the right. I put that side's Bullseye just touching the boat and gave some space on the left to allow the boat to center more. I finally got out this past weekend and was interested to see how well they would work. I just rope pulled the boat onto the trailer and winched the eye up and drove up the ramp. Got to the top to check everything out and the boat was nearly dead centered between the wheel wells of the trailer!

Getting off the lake is going to be so much easier now, without having to reset the boat all the time. The Bullseye loader is almost the same height as the OEM guide-on's from Shoreland'r, so I'm considering taking those off and selling them. They are so far outside the trailer frame that they are almost useless.
__________________
Fish the Northland
1875 Impact XS
150 Merc 4S
Helix 9 MSI G4N
Helix 7 MDI G3N

Last edited by SJC305; Yesterday at 07:51 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:35 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.