Ulterra questions

[Yellow Fever]

This could probably fit in a couple of headings but i know it will get seen here. My xi5 finally quit so i got the Ulterra, the lack of instructions (particularly on the remote ) is a puzzle, i have customized the settings on the remote but it seems to go back to the default, i change to Legacy mode, timeout settings and the clock and they all go back. Also everytime i deply it goes up to the top trim position and i have to trim it down. What am i doing wrong? I do have 2 remotes but the spare (which does the same thing) isn't on. So far i am wicked happy with the unit, no interference and it locks on straight.

[Ozark Bob]

Ulterra manual: https://minnkotamotors.johnsonoutdoo...erra-BT-EN.pdf

Heading sensor installation: https://minnkotamotors.johnsonoutdoo...ing-Sensor.pdf

You did not say if you had link or just iPilot I will get the ipilot but if you need the link manual its on the Minn Kota site under support/manuals.

ipilot manual: https://minnkotamotors.johnsonoutdoo...ilot-BT-EN.pdf

From the Humminbird site
Helix/ipilot link: https://www.humminbird.com/sites/hum...link-helix.pdf

There is a bunch available, Download what you need. Bob

[Smokemuch]

That sounds a bit odd. Mine returns to the last position I had it in before stowing when it is re deployed. I do have the G1 Ulterra though no blue tooth.

[Ozark Bob]

Bluetooth is the same. Last depth you had it set at is the depth it will deploy at.

[Yellow Fever]

Bob...i have the i pilot with Bluetooth, and yes every time i deploy i have to trim down, k stows ok.

[GOS]

Make sure the latest updates are installed on the remote and the TM head unit. That requires a smart phone. There are videos on Youtube for most of the stuff you might need. Gregory

[Yellow Fever]

Originally Posted by GOS

Make sure the latest updates are installed on the remote and the TM head unit. That requires a smart phone. There are videos on Youtube for most of the stuff you might need. Gregory

I did pair it with my phone and it did an update

[Yellow Fever]

I think i solved the iisue with my trim staying up on 1st deployment, when i was done fishing i was powering the batteries off ,thus the trim was up. I now power the unit off then shut the batteries down. Still can't get the clock right and it to stay in Legacy mode.

[iBigmacius]

Originally Posted by Yellow Fever

I think i solved the iisue with my trim staying up on 1st deployment, when i was done fishing i was powering the batteries off ,thus the trim was up. I now power the unit off then shut the batteries down. Still can't get the clock right and it to stay in Legacy mode.

Noob


Sent from my iPhone using Tapatalk

[Hat Trick]

Lol