|
#1
|
|||
|
|||
Lowrance overlay
So...a strange one. I have a Live 16 at the console and it is networked to a Live 9, the 16 wont show the depth overlay unless the 9 is on? It does show bottom. I am not even sure that is a network thing is it?
__________________
Don't count the days, Make the days count YouTube...Jim Lyon Fishing |
Sponsored Links | ||
Advertisement | ||
|
#2
|
|||
|
|||
Try look at network then sources and go down to sonar expand to see if your global depth is checked for the hds12.
That’s where I would start. Marty |
#3
|
||||
|
||||
What transducer(s) are connected to the Live-16 and the Live-9 respectively?
__________________
Lowrance Simrad PowerPole |
Sponsored Links | ||
Advertisement | ||
|
#4
|
|||
|
|||
I'm assuming the depth overlay still appears on the screen, you just don't get a value?
Power button> Edit overlay>Select your depth overlay>Menu>Edit>Data sources. (At least I think those are the menu options, if not it'll be very close to that ) From there, you can select your data source that it's taking the value from. My guess is that right now it's set to your Live 9, select the one of the Channels (transducers) connected to your Live 16 that is your 2D source, and you'll have that data at all times, regardless of whether your Live 9 is turned on or not. Waxy |
#5
|
|||
|
|||
Thank you gentlemen. ...the 9 has no transducer, pulling off the 16.
__________________
Don't count the days, Make the days count YouTube...Jim Lyon Fishing |
#6
|
|||
|
|||
So...i did some experimenting after i got your replies,. As i mentioned i have a 16 Live linked via Network cable only to a 9 Live, the 9 live shows the depth in the overlay all the time, on the 16 i have to select the source in the overlay depending on the channel i use. It appears thet anytime i switch channels i have to go into the overlay and change the source. This see s a bit strange. Are my findings correct? Can't figure out why the 9 shows it all tne time.
__________________
Don't count the days, Make the days count YouTube...Jim Lyon Fishing |
#7
|
||||
|
||||
Quote:
__________________
Lowrance Simrad PowerPole |
Thread Tools | |
Display Modes | |
|
|