Transducer installation "codes"

[masterchither]

Originally Posted by b_cdot

You will be able to have your 3 in 1 and your hst wsbl plugged in at both times. Different port for each. You will have an option to pick between which transducer you want to use on your screen. Your 3 in 1 will give you 2d sonar... when you are on plane you might lose your picture when selecting 3 in 1. Just be aware that you can usually fine tune the location of the transducer to give you a good picture while on plane through the 3-1

I see, that makes perfect since. Thank you!

[b_cdot]

But if you have your 3 in 1installed take your lss2 off. You might find your location foe lss2 might be a good location foe the 3-1 too

[masterchither]

Originally Posted by b_cdot

But if you have your 3 in 1installed take your lss2 off. You might find your location foe lss2 might be a good location foe the 3-1 too

For sure, I would pull the LSS2 off, and it's a one for one replacement on my transom. Meaning there is already that bracket screwed in, I just have to replace the other part that holds the transducer.

Thank you!