2014 Ranger 620Vs No Power

My 2014 Ranger 620 doesn't turn on when i enter the start code. No lights no nothing. I have power at the power terminals on the computer under the dash but the keypad doesn't light up. Need help on trouble shooting?

[PJM]

Walley

Did you unhook your battery over the winter and is your motor hook up to the starting battery. What motor are you running?

[Modog]

Try turning your main breaker off and back on a few times. I had the same thing happen to my 2014 (only happened once) and it was all good to go then.

[#walleye]

batteries were taken put and
stored in heated shop, etec 250ho,

are you talking about the 30amp breaker or the battery selector switcb?

[Modog]

I should have said the Battery selector switch, yes

[jabecker]

Are all of your wires connected to the terminals of your battery?. I missed hooking one of mine up one year. x2 on the breaker.

[#walleye]

yes, i have turned the battery selector switch off and on and placed it in different positions. No lose wires around.

I have 12 volts up at the mother board under the dash which serves power out to everything.

[red reno]

It isn't in gear? Or the power/kill switch (tether chain)didn't come off?

[kman]

Originally Posted by #walley

My 2014 Ranger 620 doesn't turn on when i enter the start code. No lights no nothing. I have power at the power terminals on the computer under the dash but the keypad doesn't light up. Need help on trouble shooting?

Key pad is shot. unplug the keypad and get a keyed ignition.

I've been carrying a spare keyed ignition for years just in case. plug and play.

[REW]

Take the boat to your dealer and be in the shop when the fellows work on your boat, so that you can observe what is done to resolve your issue, and how to avoid it in the future.

Or, call the Ranger factory and ask them for a list of trouble shooting steps to resolve your issue.


Good luck