Let's see your electronics install

[Ichthyguy]

[QUOTE=jbird68;5465082]

Originally Posted by Ichthyguy

I like that bracket idea, looks clean. Windshields are so over-rated.

Not when it's cold out.

Agreed, Just commenting, because mostbof us no longer can see out of our windshield because or electronics are in the way.

[06x6spdGTO]

Added another HDS-9 Gen3 at the Bow, all linked in with Point-1 and StructureScan 3D. Still have the Garmin 73sv Chirp w/ GT52 Ducer as a backup on the bow also.

[BenCour]

Here is the latest install on my 2013 Lund Tyee 1800.

Solix 15 SI (Dual Mega Transducer + Dual Beam 200/83)
Onix 10 SI ( 2D AirMar TM150)
Onix 8 Combo which can be run either at the stern or the Bow.
FishHawk X4
Garmin GPSMAP 620 for additional mapping
Depth transducer for my Cannon Digi Troll downriggers.
Ulterra 80 with i-Pilot Link / Bluetooth


Pretty happy about the whole setup.

Ben

[Tim W]

That looks awesome.

Are you able to read depth at high speed?

I have a Lund Impact 1875 with a Helix 10 DI. I have tried moving the transducer up, down, sideways and every other direction you can imagine. I even went as far as to buy a 2-D transducer and a Y-cable. Hooked everything up and still can't get it to read at speeds over 25 MPH.

When I look at the bottom of the transom at plane speed I see a huge bubble trail. The Impact has a double row of rivets running clear across the bottom edge of the transom. No way to get away from it.

Not sure if the Tyee is the same. Ant info will help.

Thanks
Tim

[BenCour]

Originally Posted by Tim W

That looks awesome.

Are you able to read depth at high speed?

I have a Lund Impact 1875 with a Helix 10 DI. I have tried moving the transducer up, down, sideways and every other direction you can imagine. I even went as far as to buy a 2-D transducer and a Y-cable. Hooked everything up and still can't get it to read at speeds over 25 MPH.

When I look at the bottom of the transom at plane speed I see a huge bubble trail. The Impact has a double row of rivets running clear across the bottom edge of the transom. No way to get away from it.

Not sure if the Tyee is the same. Ant info will help.

Thanks
Tim

I can get reading over 25 MPH but I will loose it at top speed, probably due to turbulence from the mega ducer. I use to have the same setup with non mega ducer and I was able to get reading even at top speed. I will try to fix it once the water warm up a bit.

[bassin08]

I have one of these running on sonar and one on mapping. The mount is from Cisco Systems.

[CSH Kucinski]

Well I finally got my North River Seahawk rigged up and everything is working perfectly thanks to a buddy of mine and Hawker. Here are some pictures:

[sfw1960]

Current Setup:

Helix 12 MSI G2N
Helix 12 SI
Helix 12 DI
859 ci HD DI
i-Pilot Link
AS GRP
AS GPS HS
AS ETH 5PXG

They can run, but they can't hide!

[JBhunter45]

My setup.
That's the longest 2.5" RAM mount arm, cant really tell in picture.
And that remote died on me last weekend.
New one ordered for upcoming UP trip.
I can run seat slider in rearmost position and still reach the graph while running.
Space behind phone and remote is for a upcoming VHF.

[Dave Mulder]

Here is the rigging on my 185 Tiller. 2 - 959's DI at the back and a 1198 SI up front